Stairville Prometheus Spark 1 handleiding
Handleiding
Je bekijkt pagina 29 van 48
1. Press the [OK] button.
2.
Navigate to the menu via ‘Setting è DMX Channel’.
ð
The device displays the DMX mode in use.
The device responds to the commands of a DMX controller that are received via the set DMX
address. Depending on the selected DMX mode (2- or 8-channel), the corresponding DMX
commands of the next higher DMX channels are processed.
1. Press the [OK] button.
2.
Navigate to the menu via ‘Setting è DMX Address è Set DMXAddr’
3.
Use the and buttons to select a DMX address in the range of ‘1’ … ‘512’ and conrm
the setting with the [OK] button.
For safe operation, an additional DMX safety address must be set. DMX control of the device is
then only possible if a corresponding signal to switch on DMX control is sent at the same time
as the standard DMX command on the DMX safety address.
1. Press the [OK] button.
2.
Navigate to the menu via ‘Setting è DMX Address è Set SafetyAddr’.
3.
Use the and buttons to select a DMX address in the range of ‘1’ … ‘512’ and conrm
the setting with the [OK] button.
Setting the DMX address
Setting the DMX safety address
Operating
Prometheus Spark 1
29
Spark Eect
Bekijk gratis de handleiding van Stairville Prometheus Spark 1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | Prometheus Spark 1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2973 MB |
