Stairville DJ Lase RGB Pro Advanced 3000 handleiding

Verlichting

Stairville

72 pagina's

PDF beschikbaar

Handleiding

1 On / o switch. When the device is in the Auto Show mode or is performing a self test, press the button for several

seconds to enter the Remote control mode.

When the device is already in the ‘Remote control’ mode, this button switches the laser on or o.

2 Colour selection button. Colour selection changing to the right, next step

3 Stops or restarts a running show.

4 Changes the pattern in four dierent mirror directions. Release the button to conrm the desired setting.

5 Numeric keypad for direct input of values (microphone sensitivity or pattern number). To enter two-digit numbers,

press [-/--] before the rst digit and before the second digit.

6 [A] | Press this button to switch to ‘TIME’ mode. Press the button again to select the display mode: time only, time

and date.

Press and hold the button for several seconds to adjust the time. The number to be set ashes. Use a button from [0]

to [9] on the number pad to set the required value. Use one of the colour selection buttons to select the desired

colour in which the settings are projected onto a surface. Press [A] again to save your settings.

[B] | Press the button to switch to ‘COUNTDOWN’ mode.

Press and hold the button for several seconds to set the countdown adjustment. On the numeric pad, select a key

from [0] … [9] to adjust the required value. Press [B] to start the countdown, press to stop the countdown.

[C] | Press the button to switch to ‘TEXT’ mode. On the number pad, select a key between [0] … [9] to select the

required pre-set text mode to be projected on a surface.

7 Colour selection button. Colour selection changing to the left, previous step

Connections and operating elements

DJ Lase RGB Pro Advanced 3000

Showlaser

Bekijk gratis de handleiding van Stairville DJ Lase RGB Pro Advanced 3000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.