Stairville All FX Bar handleiding
Handleiding
Je bekijkt pagina 8 van 32
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with the coating of the oor and cause permanent dark
stains after some time. If necessary, use a suitable mat or felt slide to prevent direct contact between the device’s rubber feet and
the oor.
As the operator of the laser system, you must comply with legal occupational safety
obligations as per the OStrV (in Germany). The following applies in particular:
n Before putting into service, draw up an assessment of the risk posed by the direct
and indirect eects of laser beams in line with the regulations applicable at the
operating location.
n Apply appropriate technical safety measures (e.g. shielding, protective walls, bar‐
riers) on the basis of the exposure limits determined in the risk assessment.
n Restrict the range of the laser beams to a limited area in order to reduce the risk
to persons as much as possible.
n Use technical and organisational safety measures to restrict access to the run‐
ning laser system for unauthorised persons.
n Instruct sta on the basis of the risk assessment and familiarise them with the
necessary safety measures.
Duties of the operator
Safety instructions
8
All FX Bar
LED Eect
Bekijk gratis de handleiding van Stairville All FX Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | All FX Bar |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2667 MB |
