Stairville All FX Bar handleiding
Handleiding
Je bekijkt pagina 28 van 32
10 Troubleshooting
CAUTION!
Risk of injury due to improper troubleshooting!
There is a risk of injury if troubleshooting is not performed properly.
Have all work and repairs on class 2M lasers performed by trained
experts.
In the following we list a few common problems that may occur during operation.
We give you some suggestions for easy troubleshooting:
Symptom Remedy
The device is not working, no light, the fan is
not running
1. Check the power supply and the main fuse.
2. Check the safety key switch.
No response to the DMX controller 1. If the display shows a ashing number, for example “001”, no DMX signal is
being received. Check the DMX connectors and cables for proper connection.
2. If the display does not ash and there is no response, check the address set‐
tings and DMX polarity.
3. Try using another DMX controller.
4. Check whether the DMX cables run near or parallel to high-voltage cables
that may cause damage or interference to a DMX interface circuit.
No response to the remote control 1. Check the remote control battery.
2. Try using the remote control at a dierent angle to the IR sensor on the
front panel of the device.
Troubleshooting
28
All FX Bar
LED Eect
Bekijk gratis de handleiding van Stairville All FX Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | All FX Bar |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2667 MB |
