Stairville All FX Bar handleiding
Handleiding
Je bekijkt pagina 10 van 32
4 Installation
Unpack and check carefully there is no transportation damage before using the unit.
Keep the equipment packaging. To fully protect the product against vibration, dust
and moisture during transportation or storage use the original packaging or your
own packaging material suitable for transport or storage, respectively.
You can install the device standing or hanging. When in use, the device must be
mounted at a solid surface or clamped to an approved truss.
Work from a stable platform whenever you install or move the device or when you
perform any kind of maintenance. Block access under the work area.
WARNING!
Risk of injury from falling devices that were inadequately secured!
If devices are not properly secured during assembly, they can cause
severe injury and considerable damage by falling.
When installing and operating, make sure to follow the standards and
regulations that apply in your country.
Always secure the device with a secondary safety attachment, such as a
safety cable or a safety chain.
CAUTION!
Risk of injury due to stray laser radiation!
Additional components inadequately secured to the device as well as
reective objects and surfaces at the operating location can cause stray
laser radiation, which can cause injuries.
Make sure that additional components are always secured adequately.
Make sure there are no reective objects or surfaces in the range of the
laser beams.
CAUTION!
Risk of injury due to improper installation!
There is a risk of injury if a laser is set up incorrectly and the installation
point is too low or too close to persons.
In order to comply with the maximum legal exposure limits, determine
the actual radiation intensities at the operating location as well as the
distances for laser attachment, and install the laser in line with the
ambient conditions.
Make sure the laser is rmly attached, and prevent the laser beam from
leaving the planned laser beam area (e.g. through screens, housings or
software-specic direction restrictions).
Shield laser beams from each other if multiple lasers are operated simul‐
taneously.
Install the laser in such a way that the laser beam does not enter any
trac zones.
Installation
10
All FX Bar
LED Eect
Bekijk gratis de handleiding van Stairville All FX Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Stairville |
| Model | All FX Bar |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2667 MB |
