SRS DC215 handleiding
Handleiding
Je bekijkt pagina 39 van 196
Basics 17
Stanford Research Systems DC215 Voltage/Current Source
Computer Interfaces
See Remote Programming (page 111) for details on interfacing the DC215 to a remote
computer.
GPIB
The DC215 has a GPIB (IEEE-488) communications port for communications over a GPIB
bus. The instruments support the IEEE-488.1 (1978) interface standard and supports
the required common commands of the IEEE-488.2 (1987) standard.
RS-232
The RS-232 port uses a standard 9 pin, female, subminiature-D connector. It is
configured as a DCE and supports baud rates from 4.8 kb/s to 115 kb/s. The remaining
communication parameters are fixed at 8 Data bits, 1 Stop bit, No Parity, with RTS/CTS
configured to support Hardware Flow Control.
RS-232 Pinout
Ethernet
The Ethernet uses a standard RJ-45 connector to connect to a local area network (LAN)
using standard Category-5 or Category-6 cable. It supports both 10 and 100 Base-T
Ethernet connection and a variety of TCP/IP configuration methods.
Digital IO
There are three connectors used for Digital I/O: BNC input, BNC output and DB-9
input/output. See Using Digital IO (page 92) for information on using these signals. See
Digital IO (page 63) for details on configuring the digital inputs and outputs.
5 4 3 2 1
9 8 7 6
Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | SRS |
| Model | DC215 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 30325 MB |