SRS DC215 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196/ 196

Afdrukken

Je bekijkt pagina 33 van 196

Basics 11

Stanford Research Systems DC215 Voltage/Current Source

▪ S Trig: Indicates that a step trigger has occurred.

▪ Meas: Indicates that a measurement is active

▪ S Rate: A warning that indicates a step trigger has occurred while the on-going

step is still in process.

▪ M Rate: A warning that indicates a measurement trigger has occurred while an

on-going measurement is still in process.

Keypad Area

The keypad area contains cursor keys, numeric keys, control keys and indicators.

Cursor Keys

The cursor keys are used to adjust setting values or to navigate within the menu

system.

See Display and Entry Behavior (page 14) for details on using the cursor keys.

Numeric Keys

The numeric keys include 0 – 9, ±, decimal point and [CLR] (clear). There are two Enter

keys: [mV/mA] and [V/A] that are used for both united and non-united entry.

See Display and Entry Behavior (page 14) for details on using the numeric keys.

The numeric keys in conjunction with [SHIFT] are used to access secondary functions

and the menuing system.

Control Keys

The control keys perform various actions as well as bringing different parameters to the

entry screen for modification. There are indicators associated with some of the control

keys.

[ON/OFF]

The [ON/OFF] key is one of the controls that can switch the output On or Off. See

ON/OFF Behavior (page 22) for more details. The On indicator is lit when the output is

on regardless of the method used to turn it on.

Note: [ON/OFF] can be overridden by the Output Enable. See Output Control (page 23)

for details.

[V/I]

This toggles between the voltage and current source type (voltage or current).

When changed, a source type message is briefly displayed in the left display, the units

indicators and decimal point are updated and the output is turned off.

Note: After toggling between voltage and current, the output range is set to the last

source value and range for that source type, indicated by the units and decimal point.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196/ 196

Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd