SRS DC215 handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196/ 196

Afdrukken

Je bekijkt pagina 14 van 196

Specifications xii

Stanford Research Systems DC215 Voltage/Current Source

Rise and Settling Times

Typical time constant and settling times for a 0 to full scale step, into the specified load, for a fixed

range. Values excludes any processing time, range change, ramping, any limiter function or reactive

loads.

Time Constant is the time from 0 to 63% of the final value (typ)

Settling Time is from 0 to 99.9% of the final value (typ)

Voltage

Range

Load

Time Constant

(HiBW)

Time Constant

(LoBW)

Settling Time

(HiBW)

Settling Time

(LoBW)

10 mV

1 MΩ

0.2 ms

1.0 ms

1 ms

7 ms

100 mV

1 MΩ

0.2 ms

1.0 ms

1 ms

7 ms

1 V

1 MΩ

0.2 ms

1.0 ms

1 ms

7 ms

10 V

1 MΩ

0.2 ms

1.5 ms

1 ms

11 ms

30 V

1 MΩ

0.2 ms

2.0 ms

1 ms

14 ms

Current

Range

Load

Time Constant

(HiBW)

Time Constant

(LoBW)

Settling Time

(HiBW)

Settling Time

(LoBW)

1 mA

30 kΩ

0.2 ms

2 ms

1.2 ms

12 ms

10 mA

3 kΩ

0.2 ms

2 ms

1.2 ms

12 ms

100 mA

300 Ω

0.2 ms

2 ms

1.2 ms

12 ms

200 mA

150 Ω

0.2 ms

2 ms

1.2 ms

12 ms

Response Time

Response Time is measured from an output setting event* until the output settles to within to 0.1% of

final value. No ramping, no limiting; purely resistive load as described for Rise and Settling Times.

Response time for 0 to full scale step

▪ Step within a range

▪ Step to a different range

▪ Output ON

▪ Source Type change

Conditions

HiBW

LoBW

Output Change within a range

<1 ms

<10 ms

Output Change within 1, 10 or 30 V ranges

<4 ms

<10 ms

Output Change within all ranges

<10 ms

15 ms

Changing Output Type

tbd

tbd

Output Off

~6 ms

~6 ms

Output On

~6 ms

~12 ms

* An output setting event is after a front panel value has been entered, a remote interface command

has been received, a sequence step occurs or a DIO signal has been received.

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196/ 196

Bekijk gratis de handleiding van SRS DC215, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd