Spelsberg Rapid-Box 50² 2x5 handleiding
Handleiding
Je bekijkt pagina 22 van 28
22
ASSEMBLY
Installation instructions
Note:
If the terminal is used as a connecting terminal, the
two cable ends must be arranged under a clamping
point.
Before the cable is finally inserted, the seal must be prepared. This is done by moistening the conical area
of the four sealing shells with the separately available assembly agent POWERSIL
®
Paste AP
(article no. 492 590 01) . This procedure must be repeated each time the container is resealed
.
Now the line can be inserted. The clamp’s sheath nuts
are screwed on and tightened with the torque specified
for the size of nut used.
Terminal size Torque
16 mm²
6 Nm
50 mm²
10 Nm
Enclosure Cover
Bekijk gratis de handleiding van Spelsberg Rapid-Box 50² 2x5, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Spelsberg |
| Model | Rapid-Box 50² 2x5 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3798 MB |
