Speed Queen FV6000WN handleiding
Handleiding
Je bekijkt pagina 23 van 119
Entering the Manual Mode
How to Enter the Manual Mode
For programming, testing, and retrieving information from the
control, it is often necessary to enter the Manual Mode by follow-
ing the four simple steps below. For an overview of entering the
Manual Mode, refer to the flowchart on the following page.
1. If accessing Diagnostic Tests that take control of machine op-
eration, be sure the washer is in the Start or Ready Mode be-
fore continuing to step 2. If the washer is in an active cycle,
rapid advance through the cycle. Refer to Rapid Advance
Feature.
2. All Other Models: Open the service door, if necessary, and
unplug bullet connector.
3. While pressing and holding the REGULAR keypad with one
hand, press the NORMAL keypad with the other hand.
4.
The display will show rAPid.
5. Press the DELICATE (∧) or the HOT (∨) keypad to scroll
through the options until the desired option appears in the dis-
play.
6. Press the START (enter) keypad.
NOTE: After entering Manual Mode, if no keypads
are pressed for 4.25 minutes, the control will return
to the previous mode of operation.
7. To exit, press the WARM ( < ) keypad. The control will revert
back to Ready Mode.
Manual Mode Navigation
Manual Mode is broken into six groups: Manual Programming,
Manual Read Audit, Manual Reset, Manual Rapid Advance,
Manual Diagnostics, and WiFi.
Manual Programming can only be turned on or off with an exter-
nal device or a network. Refer to the appropriate instruction man-
ual. Manual Rapid Advance and Diagnostics can be turned on
and off using an external device by manual programming (refer
to NFC Access (On/Off) NFC En or Manual Rapid Advance
rAPdEn), or with the network.
By default, all groups are turned on.
The manual features available in each group are as follows (the
menu shown on the display in this mode is in parentheses).
•
Manual Programming (Prog)
•
Manual Read Audit (AUdit )
•
Manual Reset (rESEt )
•
Rapid Advance (rAPid )
•
Manual Diagnostic Tests (diAg)
•
WiFi (WiFi)
If a group is turned off, the display will change from the selected
feature to oFF when the START (enter) pad is pressed. An audio
signal will then sound for one (1) second and the display will re-
turn to the selected feature. The features in the group cannot be
entered.
Entering the Manual Mode
©
Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
23 Part No. 807870ENR4
Bekijk gratis de handleiding van Speed Queen FV6000WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FV6000WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 14039 MB |
