Speed Queen FF7011WN handleiding
Handleiding
Je bekijkt pagina 6 van 13
Installation
Before You Start
Tools
For most installations, the basic tools needed are:
1. Safety Glasses
2. Wood Block
3. Wrench
4. Screwdriver
5. Pliers
6. Socket Wrench
7. Gloves
8. Level
Figure 2
NOTE: If the washer is delivered on a cold day (below
freezing), or is stored in an unheated room or area
during the cold months, do not attempt to operate it
until the washer has had a chance to warm up.
NOTE: Install dryer before washer. This allows room
for attaching exhaust duct.
NOTE: Some moisture in the wash drum is normal.
Water is used during testing at the manufacturer.
NOTE: This appliance is suitable for use in countries
having a warm, damp climate.
Parts Included
An accessories bag has been shipped inside your washer. It in-
cludes:
• Two washers
• Two filter screens
• Four rubber feet
• Beaded strap
• Product literature
Parts Needed
Two fill hoses are required for installation. Order 205746
Washer Hose Connection Kit if needed.
If using any other hoses, follow these requirements:
• Hoses must be new.
• Hoses must be a minimum of 3/8 in. inside diameter. Smaller
inside diameter hoses will cause long fill times which could
create nuisance fill errors.
• The two plain rubber washers and two filter screens included
with the washer in the accessories bag must be installed in
the fill hose couplings. Refer to
Connect Fill Hoses
. The fil-
ter screens help prevent foreign materials from clogging the
water mixing valve.
Order of Installation Steps
The proper order of steps must be followed to ensure correct
installation. Refer to the list below when installing your unit.
1. Position washer near the installation area.
2. Remove the shipping materials.
3. Connect the fill hoses.
4. Connect the drain hose to the drain receptacle.
5. Position and level the washer.
6. Wipe out inside of the washer.
7. Supply injection models only: Connect external supplies to
washer.
8. Plug in the washer.
9. Check installation.
Position Unit Near Installation Area
1. Move unit so that it is within 1.2 meters [4 feet] of the de-
sired area of installation.
NOTE: For best performance and to minimize vibra-
tion or movement, install washer on a solid, sturdy
and level floor. Some floors may need to be rein-
forced, especially on a second floor or over a base-
ment. Do not install the washer on carpeting, soft tile
or other weakly supported structures.
Installation
© Copyright, Alliance Laundry Systems LLC -
DO NOT COPY or TRANSMIT
6 Part No. 806987ENR3
Bekijk gratis de handleiding van Speed Queen FF7011WN, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speed Queen |
| Model | FF7011WN |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 1600 MB |
