Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 52 van 57
47
3. Tap Settings
More Settings
Configuration in the indoor station. Then enter the password of Admin to enter the following
interface. Set the indoor station type (it should be set to “Indoor station”), room number (like 101), IP address of the main door
station.
4. Set indoor extensions.
Tap Settings
More Settings
Configuration in the indoor station. Then enter the password of Admin to enter the following
interface. Set the indoor station type (it should be set to “Indoor Extension”), number (ranging from 1 to 5), IP address of the indoor
station.
Note：For one indoor station, up to 5 indoor extensions can be configured. The indoor station number is 0 by default.
5. Call indoor station through your door station (See Call Resident for details). All indoor stations (including indoor station and
extensions) will respond at the same time.
A
ppendix 1-3 Multiple Door Stations Call One Indoor Station
Application: Install multiple door stations and bind one indoor station. Press the Call button to call indoor station
Note: Up to 9 sub door stations can be set for a main door station.
The setting steps are as follows:
1. Connect your door stations and indoor station to the same local network and then set their network parameters to the same
network segment.
2. Main door station settings
Log in the web client of the door station. Click Config
Intercom
Number Configuration to go to the following interface. Set the
device type to “Main Door Station”.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
