Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 53 van 57
48
3. Sub door station settings
Log in the web client of the door station. Click Config
Intercom
Number Configuration to go to the following interface. Set the
device type to “Sub Door Station”.
Enter the actual IP address of the main door station and door station no.
Door Station No.: enter the sub door station number (ranging from 1 to 99; 0 is main station number by default). Different sub door
stations should have different door station number.
4. Tap Settings
More Settings
Configuration in the indoor station. Then enter the password of Admin to enter the following
interface. Set the indoor station type (it should be set to “Indoor station”), room number, IP address of the main door station.
5. Call indoor station through your main or sub door station (See Call Resident f
or details).
Appendix 1-4 Multiple Door Stations Call Multiple Indoor Stations
Application: Install multiple door stations (one is main door station, others are sub door stations) and multiple indoor stations (one is
indoor station, others are indoor extensions). When main door station or sub door stations call indoor stations installed in different
rooms, all indoor stations will respond at the same time. The resident can answer any one of the indoor stations and open the door.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
