Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 28 van 57
23
Resolution: The size of the image.
Frame rate: The higher the frame rate, the video is smoother.
Bitrate type: CBR and VBR are optional. Bitrate is related to image quality. CBR means that no matter how much change is seen in
the video scene, the compression bitrate will be kept constant. VBR means that the compression bitrate will be adjusted according to
scene changes. For example, for scenes that do not have much movement, the bitrate will be kept at a lower value. This can help
optimize the network bandwidth usage.
Bitrate: it can be adjusted when the mode is set to CBR. The higher the bitrate, the better the image quality will be.
Video Quality: It can be adjusted when the mode is set to VBR. The higher the image quality, the more bitrate will be required.
I Frame interval: It determines how many frames are allowed between a “group of pictures”. When a new scene begins in a video,
until that scene ends, the entire group of frames (or pictures) can be considered as a group of pictures. If there is not much
movement in the scene, setting the value higher than the frame rate is fine, potentially resulting in less bandwidth usage. However, if
the value is set too high, and there is a high frequency of movement in the video, there is a risk of frame skipping.
Video Compression: MJPEG, H264+, H264, H265 or H265+can be optional. MJPEG is not available for the mainstream. If
H.265/H.265+/ H.265S is chosen, make sure the client system can decode H.265/H.265+. Compared to H.265, H.265+ saves more
storage space with the same maximum bitrate in most scenes. Compared to H.264, H.265 reduces the transmission bitrate under the
same resolution, frame rate, and image quality.
Profile: For H.264. Baseline, main, and high profiles are selectable.
Send Snapshot: Set the snapshot stream.
Videos encode slice split: If this function is enabled, a smooth image can be obtained even though using a low-performance PC.
Watermark: When playing back the local recorded video in the search interface, the watermark can be displayed. To enable it, check
the watermark box and enter the watermark text.
Click the “Audio” tab to go to the interface as shown below.
Audio Encoding: G711A and G711U are selectable.
Audio Type: MIC
5.11.3 OSD Configuration
Go to the VideoOSD interface as shown below.
Set time stamp, device name, and OSD content here. After enabling the corresponding display and entering the content, drag them
to change their position. Then click the “Save” button to save the settings.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
