Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 27 van 57
22
50Hz: reduces flicker in 50Hz lighting conditions.
60Hz: reduces flicker in 60Hz lighting conditions.
White Balance: Adjust the color temperature according to the environment automatically.
Day/Night Mode: Choose “Auto”, “Day”, “Night” or “Timing”.
Exposure Mode: Choose “Auto” or “Manual”. If the manual is chosen, the digital shutter speed can be adjusted.
Gain Mode: Choose “Auto” or “Manual”. If “Auto” is selected, the gain value will be automatically adjusted according to the actual
situation. If “Manual” is selected, the gain value shall be set manually. The higher the value is, the brighter the image is.
Frequency: 50Hz and 60Hz can be optional.
Infrared Mode: Choose “Auto”, “ON” or “OFF”.
Schedule Settings of Image Parameters:
Click the “Profile Management” tab as shown below.
Set full schedule for common, day or night mode and specified time schedule for day and night. Choose “Timing” in the drop-down
box of the schedule as shown below.
Drag “ ” icons to set the time of day and night. Blue means daytime and blank means night time. If the current mode of camera
parameters is set to “Timing”, the image configuration mode will automatically switch between day and night according to the
schedule.
5.11.2 Video / Audio Configuration
Go to ImageVideo / Audio interface as shown below. In this interface, set the resolution, frame rate, bitrate type, video quality
and so on subject to the actual network condition.
Two video streams can be adjustable.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
