Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 22 van 57
17
Volume: Select the volume of the chime.
Select sound: Select the ringtone of the chime.
DND mode: Do Not Disturb mode. If enabled, the chime will not ring during the set time.
5.9 Intercom Configuration
5.9.1 Door Station Settings
Go to ConfigIntercom interface as shown below. Configure door station information, such as sector no., building no., floor no, etc.
Device Type: main door station or sub door station.
Note: 1. The number of the main door station is 0; the number of the sub door station is from 1 to 99. The same number is not
allowed to enter for different sub-door stations.
2. Each unit should install 1 main door station. A maximum of 9 sub-door stations can be linked to the main door station.
3. The sector no., building no., unit no., and community no. of the door station must be the same as the main door station.
5.9.2 Call Platform
Press the Call button to call the platform. Please enable this function before using this button. Go to ConfigIntercomOne-button
Calling interface. Check “Press button to call platform” and then save.
Note: Please add the door station to the platform before calling.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
