Speco Technologies O2DB1 handleiding
Handleiding
Je bekijkt pagina 20 van 57
15
Unlocking Group: Allow list, visitor (including allow list), stranger (including visitor and allow list).
Unlocking Delay Time: Set the door unlocking delay time. The time range is from 0 to 10 seconds. For example, the unlocking mode
is “Swiping Card” and the delay time is set to “2” seconds; the door will be opened 2 seconds later after successfully reading card.
Unlocking Duration: If the door has been unlocked for a period that exceeds the unlocking duration, the door will be automatically
locked. The time range is from 0 to 10 seconds. For example, the duration is set to “3” seconds; the unlocking door will be
automatically locked 3 seconds later.
Lock Type: Choose “Auto”, “NO” or “NC” as needed. If “Auto” is selected, the system will open the door according to the pre-defined
unlocking condition. “NO” means “normally open”; “NC” means “normally closed”.
5.5 Door Contact Settings
Click ConfigAccess ControlDoor Contact Setting to go to the following interface.
Door Contact Input Type: NO or NC
Unlocking Delay Time: the allowable unlocking time. For example, if it is set to 10 seconds, alarms will be triggered when the door is
not closed after 10 seconds.
Alarm Delay Time: set the alarm delay time when faults of the door contact are detected. For example, if it is set to 3s when
detecting the failure of the door contact, alarms will be triggered 3s later. (The value ranges from 0~999. If “0” is selected, it means
that alarms will be triggered immediately.)
Please select the alarm trigger options as needed.
Trigger Audio Alarm: if enabled, you will hear the warning sound when the door contact alarm is triggered.
The setup steps of other alarm trigger options are similar to the motion detection settings. Please refer to the motion detection
settings section for details.
Bekijk gratis de handleiding van Speco Technologies O2DB1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O2DB1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12026 MB |
