Speco Technologies O12MDP4 handleiding
Handleiding
Je bekijkt pagina 51 van 57
47
4.6.2 Reboot
Go to ConfigMaintenanceReboot.
Click the “Reboot” button and then enter the password to reboot the device.
Timed Reboot Setting:
If necessary, the camera can be set up to reboot on a time interval. Enable “Time Settings”, set the date and time, click the “Save”
button and then enter the password to save the settings.
4.6.3 Upgrade
Go to MaintenanceUpgrade. In this interface, the camera firmware can be updated.
1. Click the “Browse” button to select the save path of the upgrade file
2. Click the “Upgrade” or “Back up and upgrade” button to start upgrading the firmware.
3. Enter the correct password and then the device will restart automatically.
Note: If “Back up and upgrade” is selected, the configuration file will be exported to your local PC before starting upgrading.
Caution:
1. Do not allow downgrading from the current version to the lower version.
2. Do not refresh/close the browser or disconnect the camera from the network during the upgrade, or it will cause system failure.
After the device is successfully upgraded, there are ten minutes of observation. During this observation period, do not upgrade the
device again.
Note: To decrease the upgrade risk, this series of cameras adopts two systems. After one system is successfully upgraded, the other
system will be synchronized. If one system fails caused by power failure or other reasons during the upgrade, the other system will
not be affected and the camera still can work normally. You can also upgrade your camera through the normal system.
Export Upgrade Log: If upgrade error occurs, the upgrade log can be exported to help the technician to analyze and solve the
problem.
4.6.4 Operation Log
To query and export log:
1. Go to MaintenanceOperation Log.
Bekijk gratis de handleiding van Speco Technologies O12MDP4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Speco Technologies |
| Model | O12MDP4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13996 MB |
