Spear & Jackson S7520EPSP handleiding
Handleiding
Je bekijkt pagina 16 van 25
16 AFTER SALES SUPPORT 0345 605 2067 of 25 V3.5: 11/23
Switching on/off
Connect the garden tool plug to a power supply.
Fix the supply cord through cord retainer.
NOTE: Grasp the telescopic pole with your left hand and the
rear handle with your right hand.
To start the blade movement, push the lock-off button (A) and
then pull the switch trigger (B).
To stop blade movement, release the switch trigger off.
NOTE: Adjust hand placement on the telescopic pole of
garden tool to keep proper balance. Do not attempt to use the
garden tool at a length which does not allow you to achieve
proper footing and balance at all times.
1
2
OPERATION
NOTE!
With the pruner fully assembled and adjusted
it is important to check the chain oil supply is
dispensing adequate lubrication.
Chain oil
A
B
Check the oil supply
After switching on, run the chain and see if chain oil is being
dispensed as shown.
IMPORTANT-Once the starter quantity of chain oil has been
consumed, additional chain oil will be required for continued
use (available to purchase separately)
Bekijk gratis de handleiding van Spear & Jackson S7520EPSP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Spear & Jackson |
| Model | S7520EPSP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2374 MB |
