Handleiding
Je bekijkt pagina 4 van 6
Press Once Enter / Exit AuraCast Pairing Mode
Steady White AuraCast Pairing
Steady White AuraCast Connected
When you enable or disable the AuraCast feature, you will hear a notification sound.
Using the Wireless Microphones
1. Unscrew the battery cover.
2. Install two AA batteries.
Press Once Power On
Press and Hold for 2 Seconds Power Off
Press Mic Volume Up / Down
Press Adjust Vocal Removal Level
Once you power on the wireless microphones, they will automatically connect to the speaker.
The AI VOCAL REMOVAL button on the speaker can remove the original vocal from a song with just one press. While the AI Vocal Removal button
on the wireless microphone allows for adjustable vocal retention, ranging from 4% to 100%.
Once the vocal removal level is set on the microphone, the speaker will remember this setting even after restarting. This ensures that when you
activate the vocal removal feature on the speaker, the vocal removal effect will match the level set on the microphone.
Manual Pairing of Wireless Microphones
If the wireless microphones don’t connect automatically after powering on, follow the steps below to manually pair them with the speaker.
First, press and hold the Next Track and AI Vocal Removal buttons for 8 seconds on the speaker to reset pairing. Then press and hold the Volume Up and AI
Vocal Removal buttons on both microphones for 8 seconds to complete pairing.
Bekijk gratis de handleiding van Soundcore Rave 3S AI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Soundcore |
| Model | Rave 3S AI |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 885 MB |
