Handleiding
Je bekijkt pagina 38 van 164
38
About the peak brightness of this unit
The peak brightness of this unit is defined as
“Peak Lumi. Config.” and “Interlace” setting of
“System Setting”.
Set the System Gamma referring to the table
be
lo
w. As for settings of “Peak Lumi. Config.” and
“Interlace”, see page 86.
Notes
The actual displayed peak brightness and the
upper limit brightness of the flat field are
limited by the panel spec, power, temperature,
etc.
Peak brightness values are standard values
measured at D65 (x, y = 0.3127, 0.3290) and not
guaranteed values.
IP Input Config. (BVM-HX3110/HX1710N)
Configure the IP input. Data are allocated in
advance to the IP input configuration presets 1 -
10. See “About IP Input Configuration Preset
(BVM-HX3110/HX1710N)” (page 51) for details.
See also “ST2110 - Video/Audio Tab” (page 118).
User LUT Select the 3D LUT file to apply to a
picture.
Off
User LUT1 to User LUT30
Notes
To apply the 3D LUT file, you need
to load the 3D LUT file to the
monitor in advance. For details, see
“Loading 3D LUT files to the
monitor” (page 42).
Conversion processing (HDR-SDR
conversion) can be performed on
signals to which User LUT has been
applied, but note that if the LUT for
HDR-SDR conversion is set to User
LUT, double conversion will be
performed.
Marker Preset Select the marker preset to be used for
the s
ele
cted channel. You can select a
marker preset between “Preset1” and
“Preset10.”
Audio Preset Select the audio preset to be used for
the s
ele
cted channel. You can select
an audio preset between “Preset1” and
“Preset10.”
Advanced Preset Select the advanced preset to be used
f
or
the selected channel. You can
select an advanced preset between
“Preset1” and “Preset10.”
Conv. Preset This setting is available with the
o
pt
ional “BVML-H10” license (sold
separately). Select a conversion preset
to be used for the selected channel.
You can select from "Preset1" to
"Preset10."
Copy From Copy another channel’s data to the
s
ele
cted channel.
The peak brightness of this unit Interlace Off Interlace On
Peak Lumi. Config. 400 400 cd/m
2
200 cd/m
2
500 500 cd/m
2
250 cd/m
2
600 600 cd/m
2
300 cd/m
2
700 700 cd/m
2
350 cd/m
2
1000 1000 cd/m
2
500 cd/m
2
2000 2000 cd/m
2
1000 cd/m
2
3000 3000 cd/m
2
1500 cd/m
2
4000 4000 cd/m
2
2000 cd/m
2
Submenu Setting
Submenu Setting
IP Input Config. Select the IP input configuration data
to c
onfigure. (Default value: Preset1)
Data are allocated in advance to the IP
i
nput c
onfiguration presets 1 - 10.
Name Set the names of the IP input
c
onf
iguration presets.
Clean Switch Select whether to enable or disable the
C
le
an Switch function.
Disable
Enable
Frame Rate Select the frame rate of the input IP
str
eam video data.
59.94/29.97
50/25
24
23.98
Signal Format Signal structure (4:2:2 YCbCr 10bit
fix
ed) is displayed.
IP Input1 Displays valid (Valid)/invalid (Invalid) of
t
he IP Input1
input.
Priority: Select the priority order of
the IP Input1 input.
Priority1 - 4: Select the priority
order. “Priority1” is the first
priority.
No Assign: Select when not
using IP Input1 input.
Bekijk gratis de handleiding van Sony Trimaster HX BVM-HX1710N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | Trimaster HX BVM-HX1710N |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 17930 MB |
