Sony Trimaster HX BVM-HX1710N handleiding

Monitor

Sony

164 pagina's

PDF beschikbaar

Handleiding

1) “S-Log3(Live HDR)” is the setting for

which th

is unit is used as the

monitor in the S-Log3 Live HDR

workflow which Sony advocates.

Displays the S-Log3 input signal

adding the system gamma. This

system gamma is set so that the

compatibility with the monitoring of

the conventional (SDR) environment

is valued and you can perform

suitable picture expression without

discomfort when adjusting the

picture of the HDR camera. For

details on S-Log3 Live HDR

workflow which Sony advocates,

refer to the description of What’s

HDR and the Live HDR workflow on

the Sony website.

Note

If the XYZ signal is input with “Signal

Format” set to “Auto” or “444 XYZ

12bit”, it will be fixed to the optimum

setting for XYZ signal.

Color Space Select the color space from the

following when “VPID/HDMI Auto” and

“SR Live Auto” are set to “Off”.

 ITU-R BT.709

 S-Gamut/S-Gamut3

 S-Gamut3.Cine

 DCI-P3

 ITU-R BT.2020

 SMPTE-C

 EBU

Notes

 Chromaticity points of S-Gamut/S-

Gamut3, S-Gamut3.Cine, DCI-P3,

and ITU-R BT.2020 cannot be fully

included.

 If the XYZ signal is input with

“Signal Format” set to “Auto” or

“444 XYZ 12bit”, it will be fixed to

the optimum setting for XYZ signal.

Transfer Matrix Select the transfer matrix from the

oll

owing when “VPID/HDMI Auto” and

“SR Live Auto” are set to “Off”.

 ITU-R BT.709

 ITU-R BT.2020

Set the following depending on the

“Color Spac

e” setting.

When “ITU-R BT.2020” is selected:

ele

ct ITU-R BT.2020.

When “ITU-R BT.709” is selected:

ct ITU-R BT.709.

When another item is selected: Select

the tr

ansf

er matrix setting of the

device which outputs the signal.

Note

If the XYZ signal is input with “Signal

Format” set to “Auto” or “444 XYZ

12bit”, it will be fixed to the optimum

setting for XYZ signal.

Submenu Setting

Color Temp. Select the color temperature to be

used for the selected channel.

 D65

 D93

 D60

 D50

 DCI

 DCI XYZ

 User1 to User10

2) 3)

Note

For XYZ format signals, set to “DCI

XYZ”.

1) Even though colors of different

display devices, such as LCD, and

OLED, are measured with a

commonly used color analyzer

based on CIE 1931, and are adjusted

to the same xy chromaticity, the

appearance may differ due to

differences in the optical spectrum.

To compensate for this difference,

the “D65”, “D93”, “D60”, and “D50”

settings of this unit have been

adjusted by adding an offset for

color matching with Sony

professional video monitors. (The

offset value (x–0.006, y–0.011) is

applied to the CIE 1931 (x, y) value.)

2) “User1” to “User5” and “User6” to

“

er10” indicate the chromaticity

points of D65 and D93 without an

offset as each default value. (The

values (x=0.313, y=0.329) and

(x=0.283, y=0.297) are indicated

based on the CIE 1931 (x, y) value.)

3) Chromaticity point of D65 without

an of

et can be set by respectively

setting the R (red)/G (green)/B

(blue) gain value to 1000. (The value

(x=0.313, y=0.329) can be set based

on the CIE 1931 (x, y) value.)

Chr./Bright./Cont. Sets the chroma level, brightness, and

ontr

ast for the selected channel.

(Default value: 1000/0/400)

Notes

 The brightness adjustment of “ITU-

R BT.2100(HLG)” supports the ITU-R

BT.2100-2 standard.

 The brightness adjustment of

“SMPTE ST 2084” supports the ITU-

R BT.814-4 standard.

 The brightness-adjustment

specifications of “S-Log3” and “S-

Log3(Live HDR)” are the same as

those of “SMPTE ST 2084.”

 For the XYZ format signals, set the

contrast to 192 to change the

standard brightness (at SDR 100 %

white signal input) to 48 cd/m

Submenu Setting

Bekijk gratis de handleiding van Sony Trimaster HX BVM-HX1710N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.