Sony MPES-3D01 handleiding
Handleiding
Je bekijkt pagina 19 van 138
19
Preparations for the MPE-200 Unit
Chapter 2 Preparations
2
Verify that the following values appear for the versions in the “Device
Information” that appears.
Firmware Version: 1.4x
Software Version: 1.4x
If upgrade is necessary, please contact a Sony service representative or dealer.
Setting the Time Zone
Set the time zone as follows.
This example shows how to set the time for Japan.
The factory default setting is JST (Japan Standard Time).
1
On the initial screen, select “1.”
tzselect starts up.
2
Select “5) Asia” from the region selection.
3
Select “19) Japan” from the country selection.
The following information is displayed.
4
Verify that the setting is correct, and select “1) Yes.”
When the setting is complete, the initial screen returns again.
Setting the Clock
The internal clock of the MPE-200 is set at the factory, but the setting can be
changed as follows if required.
1
On the initial screen, select “2.”
The current date and time are shown as follows.
2
Enter the date and time using the same format as above.
Japan
Therefore TZ='Asia/Tokyo' will be used.
Local time is now: Mon Oct 5 09: 06: 49 JST 2009.
Universal Time is now: Mon Oct 5 00: 06: 49 UTC 2009.
Is the above information OK?
1) Yes
2) No
Clock adjust
----------------------------------------------------------
2010-10-05 08: 57: 08
==>_
Clock adjust
----------------------------------------------------------
2010-10-05 08: 57: 08
==>2011-01-23 09: 00: 00
Bekijk gratis de handleiding van Sony MPES-3D01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | MPES-3D01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15375 MB |
