Sony MPES-3D01 handleiding
Handleiding
Je bekijkt pagina 13 van 138
13
Names and Functions of Parts
Chapter 1 Introduction
Adjustment Assistance: Recall each tab in the
“Adjustment Assistance” dialog box.
Left Optical Axis: Recall the [Optical Axis Finder]
tab for the left camera. (see page 49, page 53)
Right Optical Axis: Recall the [Optical Axis
Finder] tab for the right camera. (see page 49,
page 53)
Image Scale: Recall the [Keyframe Editor] tab.
(see page 61)
Option: Recall a dialog box for adjusting the following
other settings.
• Configure the color of the crosshair cursor that
appears in the waveform monitoring display during
optical axis search. (see page 52)
• Configure whether to display an alert in the
waveform monitoring display when the difference
between left and right values in metadata
notifications from cameras becomes great. (see page
80)
• Configure the transition rate used when recalling
Snapshots from the Shot Box. (see page 119)
• Configure whether to place a limit on the correctable
range when the Auto Scale function is enabled in the
[Convergence] tab. (see page 98)
• Configure whether to display a basic Depth Guide in
the main monitor. (see page 37)
d Help
Click here to open the [Help] menu.
The [Help] menu has the following commands.
Show System Message: Display system messages for
the SIP GUI software and the connected MPE-200
unit. When “System Message” appears on the
waveform monitoring display, you can confirm the
message with this command. The “System Message”
display is grayed out after you confirm the message,
and disappears after the problem is resolved. (see
page 33)
About Stereo Image Processor: Display version
information for the SIP GUI software and the
connected MPE-200 unit. (see page 17, page 22)
e Setup
Click here to switch to setup mode. A tabbed screen for
making various settings appears. (see page 27)
You can also switch between modes using the keyboard
function keys. For details, see “Keyboard Operations”
(page 129).
f Shot Box
Click here to switch to shot box mode. The screen for
controlling the shot box appears. (see page 116)
You can also switch between modes using the keyboard
function keys. For details, see “Keyboard Operations”
(page 129).
g Live
Click here to switch to live mode. A screen for connecting
the rig control system and performing controls appears.
(see page 100)
You can also switch between modes using the keyboard
function keys. For details, see “Keyboard Operations”
(page 129).
h Camera Pair 1 - 12
Click the number of the target camera pair for making
settings and controlling operation.
The button color indicates the connection status to the SIP
GUI software.
: Connected and selected.
: Connected but not selected.
: Not connected.
For information on the correlation of camera pair
numbers and MPE-200 unit, see the section “Assigning an
MPE-200 Unit” (page 28).
i Tab (in setup mode)
Serves for making various settings.
You can also switch between tabs using the keyboard
function keys. For details, see “Keyboard Operations”
(page 129).
[System] tab: Serves for making genlock
(synchronization) signal and camera preset settings
and for viewing system mode information. (see page
30)
[Camera Alignment] tab: Serves for providing
correction for left/right camera alignment, roll shift,
zoom shift, and other alignment errors, using digital
signal processing technology. (see page 44)
[Color Correction] tab: Serves for ensuring color
matching between left and right camera. (see page 65)
[Waveform Monitoring] tab: Serves to make settings
for the waveform monitoring display function. (see
page 74)
[Stereo Monitoring] tab: Serves to make settings for
the function that enables stereo image alignment on
the waveform monitoring display. (see page 82)
[Convergence] tab: Allows tuning the appearance of
the 3D image. (see page 94)
j WFM Lower Third
Select whether to display waveforms, depth information,
histograms, or keyframes in the lower part of the
waveform monitoring display. (see page 77)
k Main Monitor / Lock
Sets the output format for the main monitor*. To lock this
setting, place a check mark next to [Lock]. (see page 36)
Bekijk gratis de handleiding van Sony MPES-3D01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | MPES-3D01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15375 MB |
