Handleiding
Je bekijkt pagina 81 van 100
Adjustment Using the Menus
81
MARKER SETTING
MULTI DISPLAY SETTING
–
Submenu Setting
MARKER ENABLE Selects ON to display the marker
and OFF not to display.
Note
When NATIVE is selected in the
SCAN setting, the marker is not
displayed.
To display the marker, select a
setting other than NATIVE.
MARKER SELECT Selects the aspect ratio according to
the film, when the frame of the film
is displayed on the screen.
When 16:9 aspect ratio is selected
with the button which the aspect
function is assigned
You can select from among
4:3, 15:9, 14:9, 13:9, 1.85:1,
2.35:1, 1.85:1 & 4:3 and
OFF.
When 4:3 aspect ratio is selected
with the button which the aspect
function is assigned
You can select 16:9 or OFF.
CENTER MARKER Selects ON to display the center
mark of the picture and OFF not to
display.
INPUT
4
3
16
9
NATIVE
(720P)
LMD-4251TD:
1280 × 720
LMD-2451TD:
1280 × 720
MARKER ENABLE: xxx
MARKER SELECT: xxx
CENTER MARKER: xx
SAFETY AREA: xxx
MARKER LEVEL: x
MARKER MAT: xxx
USER CONFIG – MARKER SETTING
SAFETY AREA Selects the safe area size for the
aspect ratio determined by the
button which the aspect function is
assigned.
You can select from among OFF,
80%, 85%, 88%, 90% and 93%.
When the marker is displayed, the
safe area for the marker is
displayed.
MARKER LEVEL Sets the luminance to display the
MARKER SELECT, CENTER
MARKER and SAFETY AREA.
You can select from among 1 to 3.
When the setting is low, the marker
is displayed dark.
MARKER MAT Selects whether you put mat on the
outside of the marker display.
• OFF: No mat is put.
• HALF: Gray mat is put.
• BLACK: Black mat is put.
Submenu Setting
MULTI DISPLAY
ENABLE
Selects ON to display the multi display
and OFF not to display.
Notes
• When the frame frequency of the
main display is different from that of
the sub display, the picture may be
disturbed. When no signal is input to
the main display, the picture may not
be displayed correctly.
• When the multi display is enabled,
the marker display is not available.
• 3D display is only available in the
main display when PIP multi display
mode is selected. In other multi
display modes, images appear in the
2D display.
Submenu Setting
MULTI DISPLAY ENABLE: xxx
MULTI DISPLAY: xxx
SUB INPUT SELECT: xxx
POSITION: x
FRAME: x
SUB PICTURE SIZE: x
USER CONFIG – MULTI DISPLAY SETTING
Bekijk gratis de handleiding van Sony LMD-2451TD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | LMD-2451TD |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 20038 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| LED-indicatoren | Stroom |
| Bluetooth | Nee |
| Aan/uitschakelaar | Ja |
| Beeldscherm | LCD |
