Sony HKCU-HB10 handleiding
Handleiding
Je bekijkt pagina 8 van 32
8
HDC1500R/1400R/1500: HKC-HB15 Installed
HDC1500R/1400R/1500: HKC-HB15 Installed
Connector Panel
a CCU connector (optical/electrical multi-connector)
The connector becomes applicable both for HD-SDI and
“High Bit Rate” transmission.
b REMOTE connector (8-pin)
When the camera is used as a main camera in a Sub-
Camera system (page 27), connect with the REMOTE
connector of the sub camera.
The connector operates the same as before function
enhancement in other conditions.
Sub-Camera system cannot be established with the
HDC1500.
c SDI 1 connector (BNC type)
You can select the output signal with SDI-1 OUT on the
<SDI OUT> page of the MAINTENANCE menu.
For Dual Link formats: LINK-A (HDC1500R/1500
only), HD PROMPTER, 3G-SDI
For Single Link formats: MAIN(HD-SDI), HD
PROMPTER
Output signal selection is not possible when the camera is
used in a COAXIAL connection system (page 25) or Dual-
Camera system (page 26), as the connector is used for
connection to a camera control unit or connection between
the primary camera and secondary camera.
For the signal settings, see “Video Formats and the Output
Signals of the Camera” (page 11).
d HD TRUNK IN connector (BNC type)
The conventional PROMPTER 2 output connector is
changed to a trunk signal input connector.
When a camera control unit equipped with an HD
TRUNK OUT connector is connected: The input
The figure shows HDC1500R.
c SDI 1 connector
a CCU connector
b REMOTE connector
e SDI 2 connector
d HD TRUNK IN connector
f AUDIO IN CH2 switch
Note
Note
Bekijk gratis de handleiding van Sony HKCU-HB10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | HKCU-HB10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4397 MB |
