Sony DWM-30 handleiding
Handleiding
Je bekijkt pagina 9 van 38
9
2
Press the + or – button repeatedly until the
GP/CH indication is displayed.
3
Hold down the SET button until the item to be
set flashes.
4
Press the + or – button repeatedly to select a
group.
5
Press the SET button to enter the group.
The channel indication starts flashing.
6
Press the + or – button repeatedly to select a
channel.
7
Press the SET button to enter the channel.
To start signal transmissi
on with the selected
channel, turn off the power and then turn it on
again.
To set the group/channel using the
pairing mode of the Cross Remote
When the transmitter is paired with the receiver,
the transmission channel of the transmitter is set
to the receiving channel on the receiver
automatically.
For details, see “Pairing with a receiver” (page 9).
Using Cross Remote
This transmitter is equipped with a wireless remote
control function that can be used to set the
parameters (low-cut filter, attenuation operation,
power save mode, etc.) of the transmitter through
the receiver or other devices. This function makes
it easier to operate and manage the microphone
system while in the field.
This wireless control is 2.4 GHz IEEE802.15.4
complian
t and has no effect on the RF band of
digital wireless audio.
This function is activated when pairing is
established
between the transmitter and the
receiver using the RF REMOTE function.
Pairing must be done first before the wireless
rem
ote control function can be used.
If “RESTRICTED BY GP/CH SETTING” appears on the
RF
REMOTE screen, the wireless remote control
function cannot be used. To use the wireless
remote control function, select a different
transmission channel.
For details on how to change the transmission
channel, see “Setting the Transmission Channel”
(page 8).
Pairing with a receiver
Pairing links the transmitter with the receiver
which the wireless remote control function is to be
used.
When the transmitter has
been paired with a
receiver through the receiver operation, turning on
the transmitter while holding down the – button
establishes the pairing immediately.
To carry out pairing through menu operations on
the transmitter, do the following.
1
Set the receiver to be used for controlling the
transmitter to pairing mode.
For details, refer to the operating instructions
supplied with the receiver.
2
Press the + or – button repeatedly until the RF
REMOTE indication is displayed.
3
Hold down the SET button until the item to be
set flashes.
4
Press the + or – button repeatedly to select
PAIRING.
5
Press the SET button to enter.
Note
Note
Bekijk gratis de handleiding van Sony DWM-30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | DWM-30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4040 MB |
