Sony DWM-30 handleiding
Handleiding
Je bekijkt pagina 8 van 38
8
Attaching the Supplied
Accessories
Replacing the Identification Ring
A black ring is attached at the factory.
When multiple microphones ar
e used in the
system, identification rings with different colors
are useful to distinguish a microphone from
another.
To remove the lock cap, move the lock cap in the
followi
ng sequence.
1
Pull it down.
2
Turn it left.
3
Pull it down.
4
Turn it right.
5
Pull it down.
Setting the Transmission
Channel
The transmitter provides groups of interference-
free channels. When using multiple microphones
and transmitters at the same time (simultaneous
multi-channel operations) within the same area,
selecting the same group and using a channel
within that group can prevent signal interference.
To set the transmission channel
of the unit, first
select a group and channel that is free from
interference and congestion using the RF indicator
and scanning functions on the receiver. Next, set
the group and channel parameters on the unit to
match the setting on the receiver.
• Certain transmission channels cannot be used
with the wireless remote control function.
For details on transmission channels that do not
support the wireless remote control function,
refer to the frequency lists.
• When selecting the channel, “(INCOMPATIBLE
WITH RF REMOTE)” will slide across the display
for transmission channels that cannot be used
with the wireless remote control function.
• When a transmission channel that cannot be
used
with the wireless remote control function is
selected, “RESTRICTED BY GP/CH SETTING”
appears on the RF REMOTE screen and the
wireless remote control function cannot be used.
To enable use of the wireless remote control
function, select transmission channels for which
“(INCOMPATIBLE WITH RF REMOTE)” does not
appear during channel selection.
Selecting the group/channel
• Before doing this procedure, use the BAND
function
(see page 13)
to set the transmitter to
the bandwidth of the receiver you are using.
• The setting for this function cannot be changed
during
actual signal transmission.
Set the transmitter group (GP) and
channel (CH) as
follows:
For details on groups and channels included in
each frequency band, refer to the frequency lists.
For details on menu operation, see “Basic Menu
Operations” (page 12).
1
Turn off the power, and then while holding
down the SET button, turn the power on.
The signal transmission stops.
1
2
3
4
5
Rotate and remove the
lock cap to replace the
identification ring.
Identification ring
Lock cap
Notes
Notes
Bekijk gratis de handleiding van Sony DWM-30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sony |
| Model | DWM-30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4040 MB |
