Sonifex PS-PLAY handleiding
Handleiding
Je bekijkt pagina 17 van 44
9
PS-PLAY IP to Audio Streaming Decoder 3
USB Socket
The USB socket is available so that playlists stored on a USB stick can be
played from the PS-PLAY. Set up the playlist on the USB stick and insert it
into this socket.
The USB port is not fully USB 1.1 compatible and has the following
limitations:
• Only the Mass Storage class is supported.
• HUBs are not supported (certain flash disks contain an embedded hub).
• Only the first partition is supported.
• The partition must be formatted as FAT16.
• It can only read a maximum partition size of 4GB.
Most of the existing USB flash disks are supported.
Headphone Output & Volume Control
The headphone output is a ¼” stereo jack socket, designed to drive 150
mW into 32Ω to 600Ω professional headphones. It is used to monitor the
currently selected output.
The headphone output has its own volume control and has a maximum
output level of +12dBu.
Output Level Control
The O/P LEVEL button allows you to have either a FIXED level output
(button depressed) or to have the output level adjustable by using the
front panel VOLUME control.
Fig 3-5: PS-PLAY USB Socket
Fig 3-6: PS-PLAY Headphone Socket, Volume Control
& Output Level Control
Bekijk gratis de handleiding van Sonifex PS-PLAY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonifex |
| Model | PS-PLAY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8581 MB |
