Sonifex PS-PLAY handleiding
Handleiding
Je bekijkt pagina 16 van 44
8
3 PS-PLAY IP to Audio Streaming Decoder
Front Panel Controls & Operation
All controls and indicators are located on the front panel.
POWER LED
When on this blue LED indicates that the unit is powered.
STATUS LEDs
There are two LEDS, red and green, which together indicate boot up errors
and when data is being received. The LEDs have the following meanings:
Red LED Green LED Status Description
Flashing On Boot Load The boot loader is running
to start the unit.
Flashing
Continuously
Flashes 5 Times Boot Up The unit is attempting to
configure an IP address.
Off On Running The unit is running but not
receiving data.
Off Quick Flashing Running The unit is receiving data.
Off Blinks once every
2 seconds
Running Unit is playing URL 1
Off Blinks twice every
2 seconds
Running Unit is playing URL 2
Off Blinks three times
every 2 seconds
Running Unit is playing URL 3
Off Blinks four times
every 2 seconds
Running Unit is playing priority URL
Infra Red Receiver
Some basic functions can be controlled by an IR-Remote which is supplied.
Point the IR Receiver at this LED.
Reset Button
The Reset button is used to restart the firmware and re-initialise the unit.
Please use this button in the unlikely scenario of unit failure.
Fig 3-2: PS-PLAY Power & Status LEDs
Fig 3-3: PS-PLAY Infra Red Receiver
Fig 3-4: PS-PLAY Reset Button
Bekijk gratis de handleiding van Sonifex PS-PLAY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonifex |
| Model | PS-PLAY |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8581 MB |
