Sonifex DHY-04VS handleiding
Handleiding
Je bekijkt pagina 23 van 42
13
Hybrid Technical Description 4
13
Serial Port Control 5
5 Serial Port Control
DHY-04V Serial Connection
Default connection is 19200, e, 8, 1 and using XON/XOFF handshaking.
The serial port has reduced capability compared to the DHY-03 as the setup
and firmware functions have been removed and are implemented by an
embedded webserver.
SCI Software
Sonifex provide free of charge software, SCI, to allow you to manage
connection and control of the call handling aspects of the device. Go to
www.sonifex.co.uk/sci for the latest version.
Serial Interface Commands & Responses
ANS: - Answer Call - ACK: or NAK:
BSV: - BootStrap version - BOOT:x.xx.xxx.xxx
CLR: - Clear Call - ACK: or NAK:
DTS:nnnn - Send DTMF string nnnn -ACK: or ERR:
MAC: - MAC Request - returns current MAC
address
NET: - Network Request - returns active Network
Parameters
SER: -Serial Number Request - SER:nnnnnnn
TEL:nnnnn - Make Call - ACK: or NAK: where
nnnnn is tel number
string or
#n for speed dial
numbers (1-7)
or #L for redial last
number
UID: - Unit ID request - UID:DHY-04V
VER: - version request - VER:x.xx.xxx.xxx
SRQ: - Status Request - See Below
STA:01
STA:02
STA:03
STA:04
STA:05
STA:06
- Initialisation
- On Hook
- Ringing
- Off Hook - connected to line
- Dialling
- Firmware Update in progress
Error Messages
ERR:01 - Command Not Found
ERR:02 - Invalid Command (Error Unknown)
ERR:03 - Invalid Command (Invalid Parameters)
ERR:04 - Parameter out of range
ERR:05 - Write Parameter is Read Only
ERR:09 - Command not allowed when Call is Active
ERR:11 - Command not allowed when Call is Inactive
Bekijk gratis de handleiding van Sonifex DHY-04VS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonifex |
| Model | DHY-04VS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9063 MB |
