Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 41 van 48
MIDI settings
41
This section explains settings related to MIDI.
Explanations assume that the function setting state has
been enabled.
Press and hold
to enable the function setting state.
Setting track MIDI channels
① Press MIDI CH, and select BA.CH or DR.CH.
② Turn the
VALUE knob to select the channel.
• The channel is shown on the display.
• The setting options are OFF and CH.01–CH.16.
• This channel will be used for sending and receiving.
Setting the MIDI channel for pattern pa-
rameters
① Press MIDI CH, and select PT.CH.
② Turn the
VALUE knob to select the channel.
• The channel is shown on the display.
• The setting options are OFF and CH.01–CH.16.
• This channel will be used for sending and receiving.
Setting the MIDI channel for accessing
the active track
① Press MIDI CH, and select AT.CH.
② Turn the
VALUE knob to select the channel.
• The channel is shown on the display.
• The setting options are OFF and CH.01–CH.16.
• This channel will be used for sending and receiving.
Setting the output channel
① Press MIDI CH, and select O.CH.
② Turn the
VALUE knob and select TRCK/AUTO.
• The channel is shown on the display.
• The setting options are TRCK and AUTO.
Turning control change transmission on/
o
① Press MIDI, and select TX.CC.
② Turn the
VALUE knob to turn this ON/OFF.
• ON/OFF will appear on the display.
• Control change reception is always enabled.
Turning MIDI clock output on/o
① Press MIDI, and select TX.CK.
② Turn the
VALUE knob to turn this ON/OFF.
• ON/OFF will appear on the display.
Setting MIDI OUT
① Press MIDI, and select M.OUT.
② Turn the
VALUE knob and set it to MIDI OUT.
• OUT/THRU will appear on the display.
Setting MIDI command receipt and trans-
mission
① Press MIDI, and select M.CMD.
② Turn the
VALUE knob and select the MIDI com
-
mand setting.
• The setting is shown on the display.
• 4 settings can be chosen.
1. OFF: Do not transmit or receive
2. RX: Only receive
3. TX: Only transmit
4. RX.TX: Transmit and receive
Turning active sensing transmission on/
o
① Press MIDI, and select TX.AS.
② Turn the
VALUE knob to select ON or OFF.
• ON/OFF will appear on the display.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
