Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 27 van 48
Editing bass patch memory parameters
27
ed into 128 equal parts.)
• Both the encoder-type and volume-type
VALUE
knobs can be used.
Setting oscillator levels
① Press the button for the oscillator that will have its
level changed.
② Press
, and select PAGE 1.
The PAGE LED will become unlit.
③ Press
.
The LEVEL LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the level.
• The level is shown on the display.
• The adjustment range is 0–127.
• The value can be set from − ∞ to +6 dB (63 is 0
dB).
• Both the encoder-type and volume-type
VALUE
knobs can be used.
Setting oscillator output destinations
① Press the button for the oscillator that will have its
output destination changed.
② Press
, and select PAGE 1.
The PAGE LED will become unlit.
③ Press
.
The OUTPUT → LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the output destina-
tion.
• The output destination is shown on the display.
• 3 output destinations can be chosen.
1. PRE DISTORTION (PRE.D on display)
2. PRE FILTER (PRE.F on display)
④ Turn the
VALUE knob to set the position.
• The position will appear on the display.
• The adjustment range is 0–127.
• This cannot be set for SUB.
Changing oscillator pitches
① Press the button for the oscillator that will have its
pitch changed.
② Press
, and select PAGE 1.
The PAGE LED will become unlit.
③ Press
.
The PITCH LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the pitch.
• The pitch is shown on the display.
• The adjustment range is − 24.00 – +24.00.
• The volume-type
VALUE knob changes the value
in steps of 1.00.
• The encoder-type
VALUE knob changes the val-
ue in steps of 0.1.
Changing oscillator starting phases
① Press the button for the oscillator that will have its
starting phase changed.
② Press
, and select PAGE 1.
The PAGE LED will become unlit.
③ Press
.
The PHASE LED will light.
• The setting value is shown on the display.
④ Turn the
VALUE knob to set the starting phase.
• The starting phase will appear on the display.
• The setting range is 0–127. (The waveform is divid
-
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
