Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 26 van 48
Editing bass patch memory parameters
26
lected by pressing a step button.
• When
or is pressed, the bank name is shown
on the display for two seconds.
• The volume-type
VALUE knob can also be turned
to select banks.
• The patch name is shown on the display while the
VALUE knob is being turned.
④ Press
to copy the patch memory and start patch
memory editing mode.
Turning modulators on/o
① While pressing , press the modulator button.
• OFF will appear on the display.
• Press the modulator button again while pressing
and holding
to turn the modulator on again. (It
will be lit green when unselected.)
• ASSIGN1, assign2, and VELO cannot be turned o.
Selecting oscillator waveforms
① Turn the WAVE knobs for OSC1 and OSC2 to se-
lect their waveforms.
• The waveform name appears on the display.
• 64 types of waveforms can be selected.
• See the preset waveform list for more information.
• When an oscillator is selected, pressing its button
again will show the name of its waveform.
Setting the waveform position of the os-
cillator wavetable
① Press the button for the oscillator that will have its
position set.
② Press
, and select PAGE 1.
The PAGE LED will become unlit.
③ Press
.
The POSITION LED will light.
• The setting value is shown on the display.
• The save location can also be selected by pressing
a step button.
• When
or is pressed, the bank name is shown
on the display for two seconds.
• The volume-type
VALUE knob can also be turned
to select banks.
• The sound of the save destination can be checked
by playing the keyboard while pressing
.
• The patch name is shown on the display while the
VALUE knob is being turned.
④ Press
.
⑤ Input the name. (The character at the current posi
-
tion blinks.)
• Use and to move the input position left and
right. (Three dot positions occur between the four
characters.)
• Turn the
VALUE knob to select the character (or
turn the dot on/o at a dot position).
• Uppercase alphabet letters and numbers can be
used.
⑥ Press
to save the patch memory.
Clearing patch memories
① Follow steps ① – ④ in "Activating bass patch memo-
ry editing mode".
② While pressing
, press .
• INIT will appear on the display.
• The selected sound will be set to default values.
• The patch memory can be further edited after this.
Copying patch memories
① Follow steps ① – ④ in "Activating bass patch memo-
ry editing mode".
② While pressing
, press and select COPY.
③ Use
and or the VALUE knob to select the
number of the patch to copy.
• The number of the patch to copy can also be se-
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
