Sonicware LIVEN BASS&BEATS handleiding
Handleiding
Je bekijkt pagina 15 van 48
Pattern playback and settings
15
This section explains pattern playback and settings.
Pattern playback
① Press .
• Press again to stop playback.
• At the playback position, the step LED will become
lit if unlit or become unlit if lit.
• The page button that corresponds to the current
playback position will light red. Other page buttons
will be lit green or orange.
• During pattern playback, press a page button to
keep that page shown on the step buttons. That
button will light red. Press the
button (or ,
track or
button) to stop staying on that page.
(When the playback position is on another page,
that button will blink rapidly with the same color as
when stopped. When the playback position is not
on another page, that button will blink normally with
the same color as when stopped.
• The page buttons correspond to the steps as fol
-
lows.
Steps 1–16:
lit green
Steps 17–32:
lit green
Steps 33–48:
lit orange
Steps 49–64:
lit orange
Selecting patterns
① Press .
• The current pattern number is shown.
② Press
and to select pattern banks.
• The current bank number is shown.
• Banks 1–8 are available.
③ Press a STEP 1–16 button to select a pattern (and
end pattern selection mode).
• The
VALUE knob can also be turned to select
patterns. (Press
to conrm.)
• The pattern number is shown on the display.
• If a pattern is selected during playback, the se
-
quencer will complete playing the current pattern
before switching to the new pattern.
Changing pattern volume
① While pressing , turn the ptn level knob.
• The parameter is shown on the display.
• The adjustment range is 0–127.
• This can be adjusted from −∞ to +6 dB with 0 dB
as the middle value.
Initializing patterns
① Select the pattern you want to initialize (see "Select-
ing patterns" on p.15).
② While pressing
, press .
• When pattern initialization has completed, CLR will
appear on the display.
• All pattern and track settings as well as note and
parameter lock data will be cleared.
Selecting multiple patterns and playing
them back in order
(chain playback)
① Press twice (lights orange).
② Press
and to select the bank.
• The current bank number will be shown for two sec-
onds.
③ Press STEP 1–16 buttons to select patterns in the
order to be played.
The step LED for the selected pattern lights and the
pattern number is shown on the display.
④ Press
to play the patterns in the selected order.
• Press to end chain playback.
• Press the step button for the selected pattern
again to deselect it.
Bekijk gratis de handleiding van Sonicware LIVEN BASS&BEATS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN BASS&BEATS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6180 MB |
