Sonicware LIVEN Ambient Ø handleiding
Handleiding
Je bekijkt pagina 52 van 115
Sampling – Recording
52
1
Connect the output of the
equipment you want to re-
cord to the Ambient Ø LINE
IN.
・ Mics and guitars cannot
be connected directly. Use
a mixer or other equipment
to convert their outputs to
line signals.
2
Press .
will blink red.
Use the step LEDs to
check the recording level.
(Step 12 indicates -6dB,
Step 16 indicates 0dB)
3
Press again.
will light red and record-
ing will automatically start
when a signal is input.
The step LEDs show the re-
cording progress.
When step 16 lights, record-
ing will stop automatically.
4
Press
OK
to save the sam-
ple.
Before saving, the sample
can be checked by playing
the keyboard.
・ P r e s s to stop immedi-
ately during the recording.
・ P r e s s
CLR
to cancel the op-
eration.
R E C
●❶
●❷●❹
●❸
Bekijk gratis de handleiding van Sonicware LIVEN Ambient Ø, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sonicware |
| Model | LIVEN Ambient Ø |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12978 MB |
