Sommer ENTRAcode+ handleiding
Handleiding
Je bekijkt pagina 31 van 36
31
11.1 Programming the ENTRAcode+
on a radio receiver
NOTE
► See the instructions for the radio receiver
or the operator for the correct procedure for
selecting the desired channel on the radio
receiver, setting it to programming mode and
the correct response of the LED on the radio
receiver during the various phases of the
programming process.
► During programming, the receiver must be
located within the range of the transmitter.
► On the battery-operated version
ENTRAcode+ AP, rst press the # key to
wake the device from power-saving mode.
► The radio receiver shown here serves as an
example. The key is located in a dierent
position on each other radio receiver. See
the instructions for the receiver for informa-
tion on the exact position of the key and on
channel selection on multi-channel receivers.
som4.me/man
A
12 34
56
78
90
*
#
R
B
A. Set receiver to programming mode.
B. Enter correct PIN code.
⇒ Green LED on the ENTRAcode+ lights up while the
radio command is being transmitted.
⇒ Red LED on the receiver lights up when the radio
command has been received.
✔ The radio command has been programmed on the
receiver.
11. Programming on a radio receiver
Bekijk gratis de handleiding van Sommer ENTRAcode+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sommer |
| Model | ENTRAcode+ |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3875 MB |
