Solid State Logic SSL 2+ MKII handleiding
Handleiding
Je bekijkt pagina 32 van 61
Rear Panel Connections
INPUTS 1 & 2 : Combo XLR / 1/4" Jack Input Sockets
This is where you connect your mic/line input sources (microphones, keyboards etc) to the unit. Once connected, your
inputs are controlled using front panel Channel 1 and Channel 2 controls respectively. The combo XLR / 1/4" Jack socket
contains an XLR and a 1/4" Jack in one connector (the Jack socket is the hole in the middle). If you are connecting a
microphone, then use an XLR cable. If you want to connect a Line level Input such as or keyboard/synth, then use a Jack
cable (TS or TRS Jacks). For connecting an instrument directly (bass guitar/guitar), use the INST 1 & 2 jack connections at
the front (not the Combo XLR/Jack socket on the rear), which automatically apply an appropriate instrument impedance (1
MΩ).
Please note that the line-level input can only be accessed via the rear panel Combo jack socket, not the XLR). If you have
a line-level devices that outputs on XLR, please use a XLR to jack adapter.
BALANCED LINE OUTPUTS 1 - 4 : 1/4" TRS Jack Output Sockets
Outputs 1 & 2 are primarily to be used for your main monitors and the physical volume is controlled by the Monitor Knob on
Home Sign in / Register
10/30/24, 12:24 PM
SSL 2+ MKII User Guide – SSL Support
https://support.solidstatelogic.com/hc/en-gb/articles/20859917333789-SSL-2-MKII-User-Guide#ssl-2-mkii-user-guide-0-0
32/61
Bekijk gratis de handleiding van Solid State Logic SSL 2+ MKII, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Solid State Logic |
| Model | SSL 2+ MKII |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8952 MB |
