Soler & Palau UTBS PRO-REG ECOWATT Handleiding (96 Pagina's)

Handleiding

42

Operating mode selection

In units with electrical, if the operation mode is changed while the fans are running, the

unit will stop sequentially; ﬁ rst switching off the electrical heater, and after 2 minutes

switching off the fans, then ﬁ nally the unit will re-stard with the right working mode.

11.2.2. Installer level

In this level is possible to adjust the operating parameters of the unit: Fan, heating,

display, errors, etc..

Alarm display

Screen display settings

Adjust the brightness and display feedback.

Access settings

Remember that the equipment is supplied conﬁ gured and tested in factory. Only will

be necessary to change the settings if you have reset the controller or if it has been

replaced by another.

By accessing settings can be selected:

• Working mode of the fans.

• Settings used fan.

Bekijk gratis de handleiding van Soler & Palau UTBS PRO-REG ECOWATT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.