Soler & Palau UTBS PRO-REG ECOWATT Handleiding (96 Pagina's)

Handleiding

27

7.5.2. Additional ﬁ lters mounting

The air conditioner is supplied with a ﬁ lter mounted inside. In the long frame versions,

equipped with F7 ﬁ lter from factory it is also possible to mount a second ﬁ lter in the speciﬁ c

gap (order as accessory).

See chapter “Filter replacement” for information about the way to access ﬁ lter section

depending on the unit type.

• If you have ordered ﬂexible connections for the ends of the units, they will be supplied

separately.

7.5.3. Assembling ﬂ exible connections

7.5.4. Mixing module installation

The mixing module is installed in the intake air side and allows to realize the the mixing

between the outdoor air and the recirculated air with proportional regulation of existent

dampers in either air intakes.

The mix module and the corresponding servomotors are supplied both as accessories.

The installer should mount the damper module, using the screws and bolts supplied with

the unit. After that, mount the servomotor on the damper shaft.

Once mounted the servomotor, make the electrical connection between the servomotor

and the electrical cabinet according to the indications in the electrical diagram.

Bekijk gratis de handleiding van Soler & Palau UTBS PRO-REG ECOWATT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.