Handleiding
Je bekijkt pagina 25 van 92
25
español english français portuguese deutsch italiano
Icons Key Key function description:
ON/OFF
With the help of this button, you can switch on and switch off the
unit any time, also the same button can be used to bring the unit in
standby mode. By pressing this button digital display shows the “ON”
and at this time need to select the preset cooking function to run the
appliance. In case if within 1 minute we do not select any cooking
function, the unit automatically enters into the standby mode.
Not
e: It is necessary to select any cooking function within first minute
after switching on the appliance, to avoid unit enters into standby mode.
Function
selection key
As it has been suggested previously that there are 3 manual functions,
which are (Fry, Hot pot; and Barbecue) and 4 automatic functions
which are (Steam, Soup, Water and Milk). You can use this function
key to select any one of these preset cooking functions mentioned
above.
To select any preset cooking function, press the function button
and Hotpot function indicator light starts blinking as default cooking
function and digital display shows the default time and temperature,
which can be changed with the help of Timer/Preset and UP/Down
buttons. To change with any other cooking function keep pressing
function button until desired functions indicator light starts blinking.
Timer/Preset
S
hut down timer: With the help of this button, you can change the
cooking time of Fry, Hot pot and BBQ cooking function.
To change the cooking time of any function mentioned above, select
the function, induction hob starts working and digital display shows the
Power/Temperature, to change to the time press the timer/preset button
and digital display starts showing the 0:00. With the help of Up and
down buttons can change the time in the range of 1 minute to 4Hrs.
Start timer: This function consists starting of the cooking with delayed
time. This function only works with automatic cooking functions like
Steam, Soup, Water and Milk.
To preset the time for delayed cooking function, choose any function
from above mentioned functions, and press the timer button. Digital
display shows the 0:00 and with the help of up and down buttons can fix
the delayed start cooking time as per requirement in the range of 1 mi-
nute to 24hrs. Once delayed cooking time has been selected, within few
seconds time gets locked and digital display starts counting reverse.
Unit will start cooking automatically when time reaches to 0:00.
and power) cannot be changed.
Note: As the automatic name itself suggests time, Temperature and Power functions cannot be
changed in these cooking functions (Steam, Soup, Water and Milk). The only function can be used is
delayed start cooking function, which can be set with the help of Timer/Preset button.
Working Panel Operation Instructions:
Function description
Preparation: Place a suitable pot on the heating unit of the machine, and plug the power cord of the
machine into a suitable power socket. The "Bi" sound of the machine indicates that it is powered on.
At this time, press the ON/OFF key to start. The display shows "on" after booting, and you can press
the corresponding function key to enter the work.
Water-overflow function:
When water overflows to the glass panel, after 8 seconds of covering more than 2 buttons in the panel
control area, the digital screen displays "cccc" and the machine stops working without flashing.
Wide voltage requirements:
The machine can work normally when the low voltage is 85V. When the voltage is higher than 250V,
the power gets reduced. When the voltage is higher than 280V, the machine stops working and enter
into faulty mode.
Bekijk gratis de handleiding van Sogo COC-SS-10247, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sogo |
| Model | COC-SS-10247 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 9877 MB |
