SMART Technologies SBID-7275R handleiding

Niet gecategoriseerd

SMART Technologies

52 pagina's

PDF beschikbaar

Handleiding

Chapter 4

Connecting computers and other devices

smarttech.com/kb/171539 40

USB Type-B receptacle Video connectors

Touch 1

HDMI 1

HDMI 2

Touch 2

HDMI 3

VGA

If two computers are connected to video connectors that share the same USB Type-B receptacle, you

must disconnect the USB cable from the first computer and connect it to the second computer if you want

to switch from one computer’s input to the other’s. For example, if a room computer is connected to HDMI 1

and a guest laptop is connected to HDMI 2, you must disconnect the USB cable from the room computer

and connect it to the guest laptop when you want to switch to the guest laptop’s input.

Connecting a SMART OPS PC module

If your organization has purchased a SMART OPS PC module, you or your

organization’s installers can install the OPS PC module in the display’s accessory

slot following the OPS PC module’s installation instructions

(smarttech.com/kb/171544). You can then view the OPS PC module’s input on

the display.

For more information about the PCM8 series of SMART OPS PC modules, see

SMART OPS PC module on page15.

CAUTION

Do not install the OPS PC module or remove it from the accessory slot while the display is turned on.

Ensure the power switch on the back of the display beside the AC power inlet is in the OFF (O) position.

TIP

You can install the SMART software that is included with the display on the OPS PC module. For more

information about installing software, see Installing and using SMART software on page32.

Bekijk gratis de handleiding van SMART Technologies SBID-7275R, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.