Slingshot S (2025) handleiding
Handleiding
Je bekijkt pagina 52 van 196
If an error lamp illuminates,
retrieve the active error codes
from the display.
q
Failure Mode Indicator (FMI)
w
Suspect Parameter Number
(SPN)
e
Code Count
1. Press and hold the MODE button to enter the settings menu.
2. Press either toggle button to cycle to the “DIAGCODE” option. Press MODE
to select.
3. More than one diagnostic code may be present. Press the toggle UP button
to see if more codes are present. Press MODE to select a code.
NOTICE
If the displayed code is an engine fault code, the CHECK ENGINE lamp will
blink. If the displayed code is an EPS fault code, the EPS lamp will blink.
4. Record the three (3) numbers displayed.
5. Press MODE to exit to the settings menu.
RIDE COMMAND DISPLAY (IF EQUIPPED)
WARNING
Driving while distracted can result in loss of vehicle control, crash, and injury.
We strongly recommend that you use extreme caution when using any device
that may take your focus off the road. Your primary responsibility is the safe
operation of your vehicle. We recommend against the use of any hand-held
device while driving and encourage the use of voice-operated systems when
possible. Make sure you are aware of all applicable state and local laws that
may affect the use of electronic devices while driving.
This intuitive display includes a variety of interactive features and access to your
Slingshot’s custom information.
50
FEATURES AND CONTROLS
Bekijk gratis de handleiding van Slingshot S (2025), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Slingshot |
| Model | S (2025) |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23425 MB |
