Singer Ditto handleiding
Handleiding
Je bekijkt pagina 8 van 26
8
To Connect the Product
1. Connect the end of the power cord to the projector.
2. Connect the power cord for the projector in a
grounded power outlet.
Caution! To disconnect the product from the
power outlet, pull the plug, not the power cord.
To Adjust the Projection
When the product is connected to a power outlet, a red
rectangle is projected onto the work area.
Caution! The red rectangle must be on top of the
white frame region of the cutting mat.
Have your room dimly lit so the projected frame is vivid
red.
• Slide the projector upwards to enlarge the size of the
red rectangle.
• Slide the projector downwards to
reduce the size of the red rectangle.
Note! Make sure that the bubble in the bubble level
remains centered while sliding the projector.
Note! It is of high importance that the projection is
fitted correctly on the cutting mat. It can take some
attempts for the result to be satisfactory.
To Attach the Cords
1. Put the power cord into the cord management hook
in the bubble level.
2. Put the power cord into the slot on the flat side of
the beam.
3. Put the cord covers over the cord, into
the slots and snap them into place.
OPERATION
Before Operation
Have your room dimly lit so the projected outlines will be
clearly visible.
To Connect to Ditto App
1. Log in to the Ditto app.
Note! You will remain logged in until you actively sign
out.
Bekijk gratis de handleiding van Singer Ditto, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Singer |
| Model | Ditto |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 2624 MB |
