Singer Ditto handleiding
Handleiding
Je bekijkt pagina 5 van 26
5
Term Meaning
Splice target Use the target stickers on the splice
target projections when you splice a
pattern piece. When you move your
fabric to cut the next section, use the
target stickers and target projections
to keep the fabric pieces lined up
properly, frame by frame.
Workspace The area in the Ditto app where
the pattern pieces are arranged for
projecting onto the fabric.
SET UP
Before you Assemble the Product
1. Create an account at the Ditto web page on your
computer. www.dittopatterns.com/signup
2. When registered and signed in on your computer,
you can purchase and manage your subscription and
patterns on the website.
Note! A computer is required for these tasks. Do not
use a tablet or phone.
Download the Ditto App
1. Download the Ditto app on your mobile device.
Note! A mobile device is required for this task. Do
not use a computer.
2. Register in the Ditto app.
3. Follow the instructions that are given in the Ditto
app.
To Prepare the Work Area
Make sure that your work area meets these requirements:
• Flat work area with a minimum width of 37 in. x 25 in.
(94 cm – 63cm)
• Flat ceiling with a minimum height of 7.5 ft. – 10 ft.
(228 cm – 305 cm)
• Best possible Wi-Fi signal
• Power outlet within 10 ft. ( 3 m)
• Mobile device within 30 ft. (9 m) of the work area
Tip: Preferably use a tablet rather than a phone
when using the Ditto system. The larger screen
improves usability, making it easier to navigate the
system, and increases legibility.
INTRODUCTION
Document Description
This document contains instructions for setup, operation
and maintenance of the product. Contact customer
service for more information.
Tutorials
Video tutorial on how to setup your Ditto system, can
also be found on the web at
www.dittopatterns.com/tutorials
Product Description
This product is a beam mounted pattern projector. The
product is wirelessly connected to your mobile device
using the Ditto app and will project the pattern of your
choice.
Intended Use
Optimal use and maintenance are described in these
instructions. This product is not intended for industrial
use.
Additional assistance, by region, may be found on the
web at www.DittoPatterns.com or in the Ditto app under
“Customer Service”.
Terminology
Term Meaning
Beam The pole, that fits between floor
and ceiling, that the Ditto projector
attaches to.
Calibration Optimizes your projector to produce a
precise projection of the pattern piece
onto the work area.
Mirroring This function is the same as flipping
the pattern piece. Mirror a pattern
piece instead of cutting-on-fold. Use
the Mirror vertical or mirror horizontal
buttons in the Ditto app to flip a
pattern piece.
Projector A projector is an optical device that
displays an image of the pattern
pieces on your workspace onto a
surface, such as the cutting mat or a
piece of fabric. The projector enlarges
the pattern pieces to a precise pattern
in accurate size.
Splicing When a pattern piece is too large
for the workspace, it needs to be
sectioned into two or more separate
projections.
Bekijk gratis de handleiding van Singer Ditto, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Singer |
| Model | Ditto |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 2624 MB |
