Simrad Recon UI Board handleiding
Handleiding
Je bekijkt pagina 8 van 8
8
© 2025 Navico Group. All Rights Reserved. Navico Group is a division of Brunswick Corporation.
®
Reg. U.S. Pat. & Tm. Off, and ™ common law marks. Visit www.navico.com/intellectual-property to
review the global trademark rights.
6 By hand, rotate the lower unit 180° so the propeller (C)
is pointing forward in line with the steering transmission
(B), then press and hold the key on the foot pedal
until the trolling motor beeps three times.
¼ Note: When you rotate the lower unit 180°, the trolling
motor head also rotates 180°.
B
C
7 To exit centerline calibration mode and service mode,
press and hold the and keys on the foot pedal
simultaneously.
Calibrate the bow offset
For instructions on how to calibrate the bow offset, refer to
the Recon™ operator manual.
Calibrate the compass
For instructions on how to calibrate the compass, refer to
the Recon™ operator manual.
Bekijk gratis de handleiding van Simrad Recon UI Board, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simrad |
| Model | Recon UI Board |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1959 MB |
