Simpson TM2810241E handleiding
Handleiding
Je bekijkt pagina 11 van 132
Page 9
Storing the Nozzles
Place the nozzles in
the nozzles holders.
Adding the Pump Breather Cap
Connecting to Fuel Source (if applicable)
A fuel storage container may not be included
with the pressure washer. A proper fuel storage
system will need to be connected to the engine
using fuel-approved rubber hose (not included).
Connect the fuel line hose to the hose barb (A)
on the engine fuel lter (B). Secure with a hose
clamp (not included).
A
B
The high-pressure pump may have a breather vent that will need your attention before
using the washer for the rst time. Please see below for the style you may have.
Shipping cap
OR
1. Use the appropriate bladed screw
driver, Allen wrench, or wrench to
remove the shipping cap (usually RED)
from the top of the pump.
2. Hand thread the breather cap into the
pump.
3. Snug the cap with your ngers.
1. Grasp the label and remove both it
and the RED shipping plug.
2. The breather is now open properly.
Shipping plug
Bekijk gratis de handleiding van Simpson TM2810241E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simpson |
| Model | TM2810241E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12853 MB |
