Simpson TM2810141E handleiding
Handleiding
Je bekijkt pagina 38 van 132
Page 36
Adjusting the pump tensioner
1. Using a 9/16” wrench, loosen the
carriage bolts on either side of the
pump tensioner. Do not completely
remove carraige bolts.
2. Using a 15/16” wrench, turn the bolt
clockwise to tighten the belt. Should
the belt need to be loosened, turn the
bolt counter-clockwise.
3. Once the proper belt tension has been achieved, tighten the carriage bolts on the
pump tensioner using a 9/16” wrench.
4. Slide the belt guard into place. Thread in the mounting bolts then tighten with a
3/8” nut driver.
TightenLoosen
5. Reconnect the spark plug leads.
4. Place a straight edge on top of the belts. Using your index nger, push down on the
belts centered between the sheaves. With a ruler, measure the distance between
the top of the belts and the bottom of the straight edge. If the measurement
exceeds the calculation in Step #3, the belts need to be tightened.
Bekijk gratis de handleiding van Simpson TM2810141E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simpson |
| Model | TM2810141E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12853 MB |
