Simpson TM2810141E handleiding
Handleiding
Je bekijkt pagina 37 van 132
Page 35
Belt Maintenance (if applicable)
Maintaining the proper amount of tension on the belts prolongs the life of the belts while
assuring the proper operating parameters are met. The easiest way to determine the tension
is by measuring the amount of deection in the belts.
Removing the belt guard
1. Disconnect the spark plug leads from the spark plugs. Allow them to hang away
from the spark plugs.
2. Using a 3/8” nut driver, loosen then remove the mounting bolt(s) on the top, bottom,
and/or sides of the outer belt guard. Remove the outer belt guard from the frame;
place it to the side.
Measuring the belt deection
3. With the use of a tape measure or yard stick, measure from the center of the engine
shaft to the center of the pump shaft. Multiple this measurement by 1/64. For example,
a measurement of 12” multiplied by 1/64 equals 0.1875” (3/16”). This measurement is
the maximum amount of deection you should measure in the belts.
Bekijk gratis de handleiding van Simpson TM2810141E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Simpson |
| Model | TM2810141E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12853 MB |
