Sime HYBRID REVOLUTION 30 handleiding
Handleiding
Je bekijkt pagina 17 van 88
17
4.3 Check and safety devices
The
HYBRID REVOLUTION 30
Hybrid Heat Pumps are equipped
with the following check and safety devices:
– thermal safety thermostat 100°C
– 3 bar relief valve
– heating water pressure transducer
– delivery sensor
– DHW sensor
– smoke flue gas probe.
d
PROHIBITION
Do not commission the appliance with safety devices
which do not work or which have been tampered with.
a
WARNING
Safety device may only be replaced by professional
qualified personnel using
Sime
original spare parts.
4.4 Symbols on the appliance
The appliance is marked with the following symbols:
SYMBOL DESCRIPTION
Indicates the presence of particularly dangerous zones
in the appliance.
Indicates the presence of live electrical parts in the
appliance.
Indicates the presence of flammable refrigerant.
Indicates that information concerning the appliance is
available, for example the instruction manual.
Indicates that personnel assigned to perform
maintenance on the appliance must operate in
accordance with the instruction manual.
Indicates that the instruction manual must be read.
Indicates that the appliance must be connected to an
earthing system.
4.5 Symbols on the packaging box
The packaging box contains the following symbols:
SYMBOL DESCRIPTION
1
2
Indicates the prohibition to stack the appliance.
NON INCLINARE
DO NOT TILT
NO INCLINAR
NE PAS INCLINER
NICHT KIPPEN
Indicates that the appliance must always be
kept in the vertical position.
Indicates that the appliance must be positioned
with the side facing upwards.
4.6 Identification
The
HYBRID REVOLUTION 30
Hybrid Heat Pumps can be identi-
fied by means of:
1 Packaging label:
is located on the outside of the packaging
and includes the code, serial number of the hybrid heat
pump and the barcode
2 Energy Efficiency Label:
this is positioned on the outside of
the packaging to notify the user of the energy savings and
reduced environmental pollution of the “packet”
3 Heat pump technical data plate:
is located inside the front
panel of the hybrid heat pump and includes the appliance’s
technical and performance data and any other information
required by the laws of the country where the appliance will
be used.
4 Boiler technical data plate:
this is located inside the side pan-
el of the boiler and provides the technical specification, ap-
pliance performance and any other information required by
law
.
4
3
1
4
2
1
2
HYBRID REVOLUTION 30
3
Fonderie Sime SpA - via Garbo 27 - 37045
Legnago VR - Italy
Type: COD:
Matr. (S/N):POWER SUPPLY
Current
Power consumption
Quantity of R290 gas
Max pressure PS
N000009A
Made in Italy
Casing protection level
Net weight
The unit contains fluorinated greenhouse gas / Hermetically sealed system
Fig. 32
Bekijk gratis de handleiding van Sime HYBRID REVOLUTION 30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Sime |
| Model | HYBRID REVOLUTION 30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 16828 MB |
